Forum Index > Open Source > Sisteme de operare > (K,X)Ubuntu - Support Line

#0 by grey (Serial Thrilla) (0 mesaje) at 2007-04-11 12:42:46 (918 săptămâni în urmă) - [Link]Top
Ubuntu este un sistem de operare bazat pe Linux, disponibil gratuit cu suport din partea comunităţii cât şi suport profesional.

Comunitatea Ubuntu este construită pe baza ideilor expuse în Manifestul Ubuntu: acest software trebuie să fie disponibil gratuit (fără a se percepe nici o taxă), instrumentele software trebuie să fie folosite de oameni în limbile lor natale şi în ciuda oricăror invalidităţi, iar acei oameni ar trebui să aibă libertatea să adapteze şi să modifice software-ul pe care îl deţin în orice mod consideră ei că li se potriveşte mai mult.

Aceste libertăţi fac Ubuntu fundamental diferit de programele tradiţionale proprietare: nu numai că instrumentele pe care le folosiţi sunt gratuite, dar aveţi şi libertatea să modificaţi software-ul până în momentul în care funcţionează aşa cum doriţi dumneavoastră.

suntetz binevenitz sa lasatz intrebari, sugestii, probleme cu care va confruntatz.


  • chat-ul ubuntu pe IRC: server: irc.freenode.net channel: #ubuntu-md
p.s. bine atz venit in lumea OpenSource.


Descarcam de pe torrentsmd.com:



Linkuri utile:

Linux - Native Games




Пришел конверт, на нем крупными буквами - УБУНТУ КУБУНТУ УДУБУНТУ. Мама решила, что я в секте теперь. (c) башЪ

DACA CINEVA VREA SA COMPLETEZE ACEST MESAJ - ARUNCATI UN PM
ЕСЛИ КТО ХОЧЕТ ДОПОЛНИТЬ ЭТО (ПЕРВОЕ) СООБЩЕНИЕ - ПИШИТЕ В ЛИЧКУ

Editat de către grey la 2015-03-09 11:44:02




Mesaj util ?   Da   76 puncte

1 2 3 4 5 6 7 8 9 10 ... 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 ... 547 548 549 550 551 552 553 554 555 556
<< Precedenta      Următoarea >>

#1126 by urashima (АнИмЭшНиК) (0 mesaje) at 2007-10-06 14:28:46 (892 săptămâni în urmă) - [Link]Top
#1125 by vsx
У меня по MD 61,7 Кб :)

Не как они пихнуть на 1 CD и саму ось да и ещё дрофа


Mesaj util ?   Da   0 puncte
#1127 by smeagorl (Uploader) (0 mesaje) at 2007-10-06 17:00:59 (892 săptămâni în urmă) - [Link]Top
Установил вчера ubuntustudio 1-4. ту что собрана на основе ubuntu 7.04
Дистр специально собран для работы с графикой. Это меня и привлекло.

Почему-то не определяется внешний хард. ( хард подключен через FireWare) файловая система харда FAT32.
Причем внутренний ntfs раздел с XP система видит.
В чем может быть проблема?


Mesaj util ?   Da   0 puncte
#1128 by Gentoo (Power User) (0 mesaje) at 2007-10-06 17:14:33 (892 săptămâni în urmă) - [Link]Top
#1127 smeagorl, посмотри в dmesg, fdisk -l, загляни в /dev, и все тебе станет ясно


Mesaj util ?   Da   0 puncte
#1129 by smeagorl (Uploader) (0 mesaje) at 2007-10-06 17:51:19 (892 săptămâni în urmă) - [Link]Top
#1128 Gentoo, Извини но я еще полный нюб во всем этом. Я ничего не понял. Разжуй пожалуйтса если есть время. Заранее благодарю.
Под федорой внешний хард определился автоматом. И потому опыта с подбным багом у меня нет. Да и в линуксе как ты видишь я еще очень зеленый.
К чему хоть такая проблема относться? К мотированию FАT32, или к не распознованию устройства fireware.
Что странно. Пару недель назад я в виде теста устанавливал  ubuntu 7.04 с лайв сд и она видела мой внешний хард даже во время установки, ну после установки разумеется тоже.

P.S. Если надо скажи какую команду набрать чтоб ты увидел результат и сделал вывод.


В теме федоры раньше я както поднял вопрос примерно об этом
http://torrentsmd.com/forum.php?action=viewtopic&topicid=12711&page=49
пост 1204
пост 1205
там мне vsx обяснил что в федоре автомонтирование файловых систем посредством HAL, по умолчанию разрешено для подключаемых (removable) накопителей.

А как обстоит дело в этом дистре?


Вот что в конце списка команды # dmesg|less

[  46.652000] ieee1394: sbp2: Error logging into SBP-2 device - timed out
[  46.652000] sbp2: probe of 000bc2030002b64a-0 failed with error -16
[  46.652000] ieee1394: Failed to create unit 000bc2030002b64a-0
[  46.928000] ieee1394: Host added: ID:BUS[0-01:1023]  GUID[0011060000003ea6]
[ 5637.692000] ieee1394: Node changed: 0-01:1023 -> 0-00:1023
[ 5637.692000] ieee1394: Node suspended: ID:BUS[0-00:1023]  GUID[000bc2030002b64a]
[ 5640.264000] ieee1394: Current remote IRM is not 1394a-2000 compliant, resetting...
[ 5641.364000] ieee1394: Error parsing configrom for node 0-00:1023
[ 5641.364000] ieee1394: Node changed: 0-00:1023 -> 0-01:1023
[ 5648.580000] ieee1394: Node resumed: ID:BUS[0-00:1023]  GUID[000bc2030002b64a]
[ 7377.052000] ieee1394: Error parsing configrom for node 0-00:1023
[ 7377.732000] ieee1394: Error parsing configrom for node 0-01:1023
[ 7377.732000] ieee1394: Node suspended: ID:BUS[0-00:1023]  GUID[000bc2030002b64a]
[ 7377.732000] ieee1394: Node suspended: ID:BUS[0-01:1023]  GUID[0011060000003ea6]
[ 7378.004000] ieee1394: Node changed: 0-01:1023 -> 0-00:1023
[ 7378.004000] ieee1394: Node resumed: ID:BUS[0-00:1023]  GUID[0011060000003ea6]
[ 7378.844000] ieee1394: Current remote IRM is not 1394a-2000 compliant, resetting...
[ 7379.944000] ieee1394: Error parsing configrom for node 0-00:1023
[ 7379.944000] ieee1394: Node changed: 0-00:1023 -> 0-01:1023
[ 7387.160000] ieee1394: Node resumed: ID:BUS[0-00:1023]  GUID[000bc2030002b64a]
[ 8222.476000] NTFS driver 2.1.28 [Flags: R/O MODULE].
[ 8222.484000] NTFS-fs warning (device hda1): parse_options(): Option utf8 is no longer supported, using option nls=utf8. Ple
ase use option nls=utf8 in the future and make sure utf8 is compiled either as a module or into the kernel.
[ 8222.584000] NTFS volume version 3.1.
[10218.072000] cdrom: hdc: mrw address space DMA selected
[10218.112000] cdrom: hdc: mrw address space DMA selected
[10218.176000] ISO 9660 Extensions: Microsoft Joliet Level 3
[10218.264000] ISO 9660 Extensions: RRIP_1991A

Очень много ошибок 1394 может всетаки проблемы с устройстом Firewire?


Вот даже здесь не видно внешнеего харда (он примерно на 300 гигов)
fnhi@fnhi:~$ df
Filesystem          1K-blocks      Used Available Use% Mounted on
/dev/hda2            10760456  2571536  7642312  26% /
varrun                  322548        96    322452  1% /var/run
varlock                322548        0    322548  0% /var/lock
procbususb              322548      128    322420  1% /proc/bus/usb
udev                    322548      128    322420  1% /dev
devshm                  322548        0    322548  0% /dev/shm
lrm                    322548    33788    288760  11% /lib/modules/2.6.20-16-generic/volatile
/dev/hdc                888356    888356        0 100% /media/cdrom0
fnhi@fnhi:~$

Editat de către smeagorl la 2007-10-06 18:35:36




Mesaj util ?   Da   0 puncte
#1130 by smeagorl (Uploader) (0 mesaje) at 2007-10-06 20:14:34 (892 săptămâni în urmă) - [Link]Top
Вот мои данные. Может кто-то сможет помочь разобраться с тем как заставить ubuntu видеть мой внешний хард.
Внешний хард подключен не через USB, а через Firewire.
Хард фирмы Seagate объем 300GB. Файловая система FAT32.




fnhi@fnhi:~$ sudo fdisk -l

Disk /dev/hda: 40.0 GB, 40060403712 bytes
255 heads, 63 sectors/track, 4870 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes

  Device Boot      Start        End      Blocks  Id  System
/dev/hda1  *          1        3442    27647833+  7  HPFS/NTFS
/dev/hda2            3443        4803    10932232+  83  Linux
/dev/hda3            4804        4870      538177+  5  Extended
/dev/hda5            4804        4870      538146  82  Linux swap / Solaris
fnhi@fnhi:~$ sudo ls /dev
acpi      ptya3  ptyd1  ptypf  ptysd  ptyvb  ptyy9      sndstat  tty46  ttyb7  ttye5  ttyr3  ttytd  ttywb  ttyz9
agpgart    ptya4  ptyd2  ptyq0  ptyse  ptyvc  ptyya      stderr  tty47  ttyb8  ttye6  ttyr4  ttyte  ttywc  ttyza
audio      ptya5  ptyd3  ptyq1  ptysf  ptyvd  ptyyb      stdin    tty48  ttyb9  ttye7  ttyr5  ttytf  ttywd  ttyzb
audio1    ptya6  ptyd4  ptyq2  ptyt0  ptyve  ptyyc      stdout  tty49  ttyba  ttye8  ttyr6  ttyu0  ttywe  ttyzc
bus        ptya7  ptyd5  ptyq3  ptyt1  ptyvf  ptyyd      tty      tty5  ttybb  ttye9  ttyr7  ttyu1  ttywf  ttyzd
cdrom      ptya8  ptyd6  ptyq4  ptyt2  ptyw0  ptyye      tty0    tty50  ttybc  ttyea  ttyr8  ttyu2  ttyx0  ttyze
cdrw      ptya9  ptyd7  ptyq5  ptyt3  ptyw1  ptyyf      tty1    tty51  ttybd  ttyeb  ttyr9  ttyu3  ttyx1  ttyzf
console    ptyaa  ptyd8  ptyq6  ptyt4  ptyw2  ptyz0      tty10    tty52  ttybe  ttyec  ttyra  ttyu4  ttyx2  urandom
core      ptyab  ptyd9  ptyq7  ptyt5  ptyw3  ptyz1      tty11    tty53  ttybf  ttyed  ttyrb  ttyu5  ttyx3  usbdev1.1_ep00
disk      ptyac  ptyda  ptyq8  ptyt6  ptyw4  ptyz2      tty12    tty54  ttyc0  ttyee  ttyrc  ttyu6  ttyx4  usbdev1.1_ep81
dsp        ptyad  ptydb  ptyq9  ptyt7  ptyw5  ptyz3      tty13    tty55  ttyc1  ttyef  ttyrd  ttyu7  ttyx5  usbdev1.3_ep00
dsp1      ptyae  ptydc  ptyqa  ptyt8  ptyw6  ptyz4      tty14    tty56  ttyc2  ttyp0  ttyre  ttyu8  ttyx6  usbdev1.3_ep81
dvd        ptyaf  ptydd  ptyqb  ptyt9  ptyw7  ptyz5      tty15    tty57  ttyc3  ttyp1  ttyrf  ttyu9  ttyx7  usbdev2.1_ep00
fd        ptyb0  ptyde  ptyqc  ptyta  ptyw8  ptyz6      tty16    tty58  ttyc4  ttyp2  ttys0  ttyua  ttyx8  usbdev2.1_ep81
full      ptyb1  ptydf  ptyqd  ptytb  ptyw9  ptyz7      tty17    tty59  ttyc5  ttyp3  ttyS0  ttyub  ttyx9  usbdev2.2_ep00
fuse      ptyb2  ptye0  ptyqe  ptytc  ptywa  ptyz8      tty18    tty6  ttyc6  ttyp4  ttys1  ttyuc  ttyxa  usbdev2.2_ep81
hda        ptyb3  ptye1  ptyqf  ptytd  ptywb  ptyz9      tty19    tty60  ttyc7  ttyp5  ttyS1  ttyud  ttyxb  usbdev3.1_ep00
hda1      ptyb4  ptye2  ptyr0  ptyte  ptywc  ptyza      tty2    tty61  ttyc8  ttyp6  ttys2  ttyue  ttyxc  usbdev3.1_ep81
hda2      ptyb5  ptye3  ptyr1  ptytf  ptywd  ptyzb      tty20    tty62  ttyc9  ttyp7  ttyS2  ttyuf  ttyxd  vcs
hda3      ptyb6  ptye4  ptyr2  ptyu0  ptywe  ptyzc      tty21    tty63  ttyca  ttyp8  ttys3  ttyv0  ttyxe  vcs1
hda5      ptyb7  ptye5  ptyr3  ptyu1  ptywf  ptyzd      tty22    tty7  ttycb  ttyp9  ttyS3  ttyv1  ttyxf  vcs2
hdc        ptyb8  ptye6  ptyr4  ptyu2  ptyx0  ptyze      tty23    tty8  ttycc  ttypa  ttys4  ttyv2  ttyy0  vcs3
hpet      ptyb9  ptye7  ptyr5  ptyu3  ptyx1  ptyzf      tty24    tty9  ttycd  ttypb  ttys5  ttyv3  ttyy1  vcs4
initctl    ptyba  ptye8  ptyr6  ptyu4  ptyx2  ram0        tty25    ttya0  ttyce  ttypc  ttys6  ttyv4  ttyy2  vcs5
input      ptybb  ptye9  ptyr7  ptyu5  ptyx3  ram1        tty26    ttya1  ttycf  ttypd  ttys7  ttyv5  ttyy3  vcs6
kmem      ptybc  ptyea  ptyr8  ptyu6  ptyx4  ram10      tty27    ttya2  ttyd0  ttype  ttys8  ttyv6  ttyy4  vcs7
kmsg      ptybd  ptyeb  ptyr9  ptyu7  ptyx5  ram11      tty28    ttya3  ttyd1  ttypf  ttys9  ttyv7  ttyy5  vcs8
log        ptybe  ptyec  ptyra  ptyu8  ptyx6  ram12      tty29    ttya4  ttyd2  ttyq0  ttysa  ttyv8  ttyy6  vcsa
loop0      ptybf  ptyed  ptyrb  ptyu9  ptyx7  ram13      tty3    ttya5  ttyd3  ttyq1  ttysb  ttyv9  ttyy7  vcsa1
MAKEDEV    ptyc0  ptyee  ptyrc  ptyua  ptyx8  ram14      tty30    ttya6  ttyd4  ttyq2  ttysc  ttyva  ttyy8  vcsa2
mem        ptyc1  ptyef  ptyrd  ptyub  ptyx9  ram15      tty31    ttya7  ttyd5  ttyq3  ttysd  ttyvb  ttyy9  vcsa3
mixer      ptyc2  ptyp0  ptyre  ptyuc  ptyxa  ram2        tty32    ttya8  ttyd6  ttyq4  ttyse  ttyvc  ttyya  vcsa4
mixer1    ptyc3  ptyp1  ptyrf  ptyud  ptyxb  ram3        tty33    ttya9  ttyd7  ttyq5  ttysf  ttyvd  ttyyb  vcsa5
net        ptyc4  ptyp2  ptys0  ptyue  ptyxc  ram4        tty34    ttyaa  ttyd8  ttyq6  ttyt0  ttyve  ttyyc  vcsa6
null      ptyc5  ptyp3  ptys1  ptyuf  ptyxd  ram5        tty35    ttyab  ttyd9  ttyq7  ttyt1  ttyvf  ttyyd  vcsa7
nvidia0    ptyc6  ptyp4  ptys2  ptyv0  ptyxe  ram6        tty36    ttyac  ttyda  ttyq8  ttyt2  ttyw0  ttyye  vcsa8
nvidiactl  ptyc7  ptyp5  ptys3  ptyv1  ptyxf  ram7        tty37    ttyad  ttydb  ttyq9  ttyt3  ttyw1  ttyyf  xconsole
oldmem    ptyc8  ptyp6  ptys4  ptyv2  ptyy0  ram8        tty38    ttyae  ttydc  ttyqa  ttyt4  ttyw2  ttyz0  zero
port      ptyc9  ptyp7  ptys5  ptyv3  ptyy1  ram9        tty39    ttyaf  ttydd  ttyqb  ttyt5  ttyw3  ttyz1
ppp        ptyca  ptyp8  ptys6  ptyv4  ptyy2  random      tty4    ttyb0  ttyde  ttyqc  ttyt6  ttyw4  ttyz2
psaux      ptycb  ptyp9  ptys7  ptyv5  ptyy3  rtc        tty40    ttyb1  ttydf  ttyqd  ttyt7  ttyw5  ttyz3
ptmx      ptycc  ptypa  ptys8  ptyv6  ptyy4  sequencer  tty41    ttyb2  ttye0  ttyqe  ttyt8  ttyw6  ttyz4
pts        ptycd  ptypb  ptys9  ptyv7  ptyy5  sequencer2  tty42    ttyb3  ttye1  ttyqf  ttyt9  ttyw7  ttyz5
ptya0      ptyce  ptypc  ptysa  ptyv8  ptyy6  shm        tty43    ttyb4  ttye2  ttyr0  ttyta  ttyw8  ttyz6
ptya1      ptycf  ptypd  ptysb  ptyv9  ptyy7  snapshot    tty44    ttyb5  ttye3  ttyr1  ttytb  ttyw9  ttyz7
ptya2      ptyd0  ptype  ptysc  ptyva  ptyy8  snd        tty45    ttyb6  ttye4  ttyr2  ttytc  ttywa  ttyz8
fnhi@fnhi:~$


fnhi@fnhi:~$ sudo lshw -C disk
  *-disk                 
      description: ATA Disk
      product: SAMSUNG MP0402H
      physical id: 0
      bus info: [email protected]
      logical name: /dev/hda
      version: UC100-11
      serial: S077J10XB22416
      size: 37GB
      capacity: 37GB
      capabilities: ata dma lba iordy smart security pm partitioned partitioned:dos
      configuration: mode=udma5 smart=on
    *-volume:0
          description: HPFS/NTFS partition
          physical id: 1
          bus info: [email protected],1
          logical name: /dev/hda1
          capacity: 26GB
          capabilities: primary bootable
    *-volume:1
          description: Linux filesystem partition
          physical id: 2
          bus info: [email protected],2
          logical name: /dev/hda2
          capacity: 10GB
          capabilities: primary
    *-volume:2
          description: Extended partition
          physical id: 3
          bus info: [email protected],3
          logical name: /dev/hda3
          size: 525MB
          capacity: 525MB
          capabilities: primary extended partitioned partitioned:extended
        *-logicalvolume
            description: Linux swap / Solaris partition
            physical id: 5
            logical name: /dev/hda5
            capacity: 525MB
            capabilities: nofs
  *-cdrom
      description: DVD reader
      product: TSSTcorpCDW/DVD TS-L462A
      physical id: 0
      bus info: [email protected]
      logical name: /dev/hdc
      version: U301
      capabilities: packet atapi cdrom removable nonmagnetic dma lba iordy audio cd-r cd-rw dvd
      configuration: mode=udma2
    *-disc
          physical id: 0
          logical name: /dev/hdc
fnhi@fnhi:~$



fnhi@fnhi:/proc$ cat /boot/config-`uname -r`| grep IEEE
CONFIG_IEEE80211=m
# CONFIG_IEEE80211_DEBUG is not set
CONFIG_IEEE80211_CRYPT_WEP=m
CONFIG_IEEE80211_CRYPT_CCMP=m
CONFIG_IEEE80211_CRYPT_TKIP=m
CONFIG_IEEE80211_SOFTMAC=m
# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set
# IEEE 1394 (FireWire) support
CONFIG_IEEE1394=m
# CONFIG_IEEE1394_VERBOSEDEBUG is not set
CONFIG_IEEE1394_OUI_DB=y
CONFIG_IEEE1394_EXTRA_CONFIG_ROMS=y
CONFIG_IEEE1394_CONFIG_ROM_IP1394=y
# CONFIG_IEEE1394_EXPORT_FULL_API is not set
CONFIG_IEEE1394_PCILYNX=m
CONFIG_IEEE1394_OHCI1394=m
CONFIG_IEEE1394_VIDEO1394=m
CONFIG_IEEE1394_SBP2=m
# CONFIG_IEEE1394_SBP2_PHYS_DMA is not set
CONFIG_IEEE1394_ETH1394=m
CONFIG_IEEE1394_DV1394=m
CONFIG_IEEE1394_RAWIO=m
CONFIG_RTL_IEEE80211=m
fnhi@fnhi:/proc$


fnhi@fnhi:~$ mount
/dev/hda2 on / type ext3 (rw,errors=remount-ro)
proc on /proc type proc (rw,noexec,nosuid,nodev)
/sys on /sys type sysfs (rw,noexec,nosuid,nodev)
varrun on /var/run type tmpfs (rw,noexec,nosuid,nodev,mode=0755)
varlock on /var/lock type tmpfs (rw,noexec,nosuid,nodev,mode=1777)
procbususb on /proc/bus/usb type usbfs (rw)
udev on /dev type tmpfs (rw,mode=0755)
devshm on /dev/shm type tmpfs (rw)
devpts on /dev/pts type devpts (rw,gid=5,mode=620)
lrm on /lib/modules/2.6.20-16-generic/volatile type tmpfs (rw)
binfmt_misc on /proc/sys/fs/binfmt_misc type binfmt_misc (rw)
/dev/hdc on /media/cdrom0 type iso9660 (ro,noexec,nosuid,nodev,user=fnhi)
fnhi@fnhi:~$



--------------------------
fnhi@fnhi:~$ dmesg
[    0.000000] Linux version 2.6.20-16-generic (root@terranova) (gcc version 4.1.2 (Ubuntu 4.1.2-0ubuntu4)) #2 SMP Sun Sep 23 19:50:39 UTC 2007 (Ubuntu 2.6.20-16.32-generic)
[    0.000000] BIOS-provided physical RAM map:
[    0.000000] sanitize start
[    0.000000] sanitize end
[    0.000000] copy_e820_map() start: 0000000000000000 size: 000000000009a800 end: 000000000009a800 type: 1
[    0.000000] copy_e820_map() type is E820_RAM
[    0.000000] copy_e820_map() start: 000000000009a800 size: 0000000000005800 end: 00000000000a0000 type: 2
[    0.000000] copy_e820_map() start: 00000000000d0000 size: 0000000000004000 end: 00000000000d4000 type: 2
[    0.000000] copy_e820_map() start: 00000000000e0000 size: 0000000000020000 end: 0000000000100000 type: 2
[    0.000000] copy_e820_map() start: 0000000000100000 size: 0000000027e70000 end: 0000000027f70000 type: 1
[    0.000000] copy_e820_map() type is E820_RAM
[    0.000000] copy_e820_map() start: 0000000027f70000 size: 000000000000f000 end: 0000000027f7f000 type: 3
[    0.000000] copy_e820_map() start: 0000000027f7f000 size: 0000000000001000 end: 0000000027f80000 type: 4
[    0.000000] copy_e820_map() start: 0000000027f80000 size: 0000000000080000 end: 0000000028000000 type: 2
[    0.000000] copy_e820_map() start: 0000000037f80000 size: 0000000000080000 end: 0000000038000000 type: 2
[    0.000000] copy_e820_map() start: 00000000fec00000 size: 0000000000010000 end: 00000000fec10000 type: 2
[    0.000000] copy_e820_map() start: 00000000fee00000 size: 0000000000001000 end: 00000000fee01000 type: 2
[    0.000000] copy_e820_map() start: 00000000fff80000 size: 0000000000080000 end: 0000000100000000 type: 2
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009a800 (usable)
[    0.000000]  BIOS-e820: 000000000009a800 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000d0000 - 00000000000d4000 (reserved)
[    0.000000]  BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 0000000027f70000 (usable)
[    0.000000]  BIOS-e820: 0000000027f70000 - 0000000027f7f000 (ACPI data)
[    0.000000]  BIOS-e820: 0000000027f7f000 - 0000000027f80000 (ACPI NVS)
[    0.000000]  BIOS-e820: 0000000027f80000 - 0000000028000000 (reserved)
[    0.000000]  BIOS-e820: 0000000037f80000 - 0000000038000000 (reserved)
[    0.000000]  BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
[    0.000000]  BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[    0.000000]  BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
[    0.000000] 0MB HIGHMEM available.
[    0.000000] 639MB LOWMEM available.
[    0.000000] found SMP MP-table at 000f7730
[    0.000000] Entering add_active_range(0, 0, 163696) 0 entries of 256 used
[    0.000000] Zone PFN ranges:
[    0.000000]  DMA            0 ->    4096
[    0.000000]  Normal      4096 ->  163696
[    0.000000]  HighMem    163696 ->  163696
[    0.000000] early_node_map[1] active PFN ranges
[    0.000000]    0:        0 ->  163696
[    0.000000] On node 0 totalpages: 163696
[    0.000000]  DMA zone: 32 pages used for memmap
[    0.000000]  DMA zone: 0 pages reserved
[    0.000000]  DMA zone: 4064 pages, LIFO batch:0
[    0.000000]  Normal zone: 1246 pages used for memmap
[    0.000000]  Normal zone: 158354 pages, LIFO batch:31
[    0.000000]  HighMem zone: 0 pages used for memmap
[    0.000000] DMI present.
[    0.000000] ACPI: RSDP (v000 PTLTD                                ) @ 0x000f76a0
[    0.000000] ACPI: RSDT (v001  SEC    MAGIC  0x06040000  TPL 0x00000000) @ 0x27f7bb12
[    0.000000] ACPI: FADT (v001 SEC    MAGIC    0x06040000 PTL  0x000f4240) @ 0x27f7ed44
[    0.000000] ACPI: SSDT (v001 INTEL  CPUCSTC4 0x06040000 INTL 0x20030224) @ 0x27f7edb8
[    0.000000] ACPI: SSDT (v001 PTLTD  ACPIPST1 0x06040000  LTP 0x00000001) @ 0x27f7eed5
[    0.000000] ACPI: DSDT (v001    SEC    MAGIC 0x06040000 MSFT 0x0100000e) @ 0x00000000
[    0.000000] ATI board detected. Disabling timer routing over 8254.
[    0.000000] ACPI: PM-Timer IO Port: 0x8008
[    0.000000] Intel MultiProcessor Specification v1.4
[    0.000000]    Virtual Wire compatibility mode.
[    0.000000] SMP mptable: bad signature [0x0]!
[    0.000000] BIOS bug, MP table errors detected!...
[    0.000000] ... disabling SMP support. (tell your hw vendor)
[    0.000000] Allocating PCI resources starting at 40000000 (gap: 38000000:c6c00000)
[    0.000000] Detected 1500.157 MHz processor.
[  23.450648] Built 1 zonelists.  Total pages: 162418
[  23.450654] Kernel command line: root=UUID=5755213d-da73-435a-ba33-0ba15955584b ro quiet splash
[  23.450863] Found and enabled local APIC!
[  23.450867] mapped APIC to ffffd000 (fee00000)
[  23.450872] Enabling fast FPU save and restore... done.
[  23.450875] Enabling unmasked SIMD FPU exception support... done.
[  23.450887] Initializing CPU#0
[  23.450954] PID hash table entries: 4096 (order: 12, 16384 bytes)
[  23.451983] Console: colour VGA+ 80x25
[  23.453136] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[  23.454359] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[  23.480165] Memory: 637604k/654784k available (1993k kernel code, 16496k reserved, 900k data, 328k init, 0k highmem)
[  23.480179] virtual kernel memory layout:
[  23.480181]    fixmap  : 0xfff4e000 - 0xfffff000  ( 708 kB)
[  23.480182]    pkmap  : 0xff800000 - 0xffc00000  (4096 kB)
[  23.480184]    vmalloc : 0xe8800000 - 0xff7fe000  ( 367 MB)
[  23.480186]    lowmem  : 0xc0000000 - 0xe7f70000  ( 639 MB)
[  23.480187]      .init : 0xc03d9000 - 0xc042b000  ( 328 kB)
[  23.480189]      .data : 0xc02f2429 - 0xc03d36d4  ( 900 kB)
[  23.480190]      .text : 0xc0100000 - 0xc02f2429  (1993 kB)
[  23.480195] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[  23.558862] Calibrating delay using timer specific routine.. 3001.62 BogoMIPS (lpj=6003242)
[  23.558919] Security Framework v1.0.0 initialized
[  23.558929] SELinux:  Disabled at boot.
[  23.558952] Mount-cache hash table entries: 512
[  23.559130] CPU: After generic identify, caps: a7e9fbbf 00000000 00000000 00000000 00000000 00000000 00000000
[  23.559146] CPU: L1 I cache: 32K, L1 D cache: 32K
[  23.559149] CPU: L2 cache: 512K
[  23.559153] CPU: After all inits, caps: a7e9fbbf 00000000 00000000 00002040 00000000 00000000 00000000
[  23.559165] Compat vDSO mapped to ffffe000.
[  23.559171] Remapping vsyscall page to ffffe000
[  23.559185] Checking 'hlt' instruction... OK.
[  23.574943] SMP alternatives: switching to UP code
[  23.575124] Freeing SMP alternatives: 11k freed
[  23.575341] Early unpacking initramfs... done
[  23.951577] ACPI: Core revision 20060707
[  23.952072] ACPI: Looking for DSDT in initramfs... file /DSDT.aml not found, using machine DSDT.
[  23.953501] ACPI: setting ELCR to 0200 (from 0e20)
[  23.953507] ACPI Warning (utinit-0077): Invalid FADT value PM_TM_LEN=3 at offset 5B FADT=e7f6a680 [20060707]
[  23.955727] CPU0: Intel(R) Celeron(R) M processor        1500MHz stepping 05
[  23.955734] SMP motherboard not detected.
[  24.062462] Brought up 1 CPUs
[  24.062772] Booting paravirtualized kernel on bare hardware
[  24.062842] Time: 23:54:38  Date: 09/06/107
[  24.062881] NET: Registered protocol family 16
[  24.062996] EISA bus registered
[  24.063002] ACPI: bus type pci registered
[  24.063171] PCI: PCI BIOS revision 2.10 entry at 0xfd968, last bus=2
[  24.063174] PCI: Using configuration type 1
[  24.063176] Setting up standard PCI resources
[  24.070792] ACPI: Interpreter enabled
[  24.070798] ACPI: Using PIC for interrupt routing
[  24.073394] ACPI: PCI Root Bridge [PCI0] (0000:00)
[  24.073405] PCI: Probing PCI hardware (bus 00)
[  24.075338] Boot video device is 0000:01:05.0
[  24.075666] PCI: Transparent bridge - 0000:00:14.4
[  24.075722] PCI: Bus #03 (-#06) is hidden behind transparent bridge #02 (-#02) (try 'pci=assign-busses')
[  24.075725] Please report the result to linux-kernel to fix this permanently
[  24.075743] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[  24.077415] ACPI: PCI Interrupt Link [LNK0] (IRQs *10)
[  24.077615] ACPI: PCI Interrupt Link [LNK1] (IRQs *5)
[  24.077808] ACPI: PCI Interrupt Link [LNK2] (IRQs 6) *11
[  24.078002] ACPI: PCI Interrupt Link [LNK3] (IRQs 11) *9
[  24.079690] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT]
[  24.080809] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
[  24.081113] Linux Plug and Play Support v0.97 (c) Adam Belay
[  24.081128] pnp: PnP ACPI init
[  24.084501] pnp: PnP ACPI: found 9 devices
[  24.084507] PnPBIOS: Disabled by ACPI PNP
[  24.084580] PCI: Using ACPI for IRQ routing
[  24.084583] PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
[  24.088147] NET: Registered protocol family 8
[  24.088149] NET: Registered protocol family 20
[  24.088422] pnp: 00:07: ioport range 0x1080-0x1080 has been reserved
[  24.088427] pnp: 00:07: ioport range 0x220-0x22f has been reserved
[  24.088430] pnp: 00:07: ioport range 0x40b-0x40b has been reserved
[  24.088433] pnp: 00:07: ioport range 0x4d0-0x4d1 has been reserved
[  24.088773] PCI: Bridge: 0000:00:01.0
[  24.088776]  IO window: 9000-9fff
[  24.088781]  MEM window: c0100000-c01fffff
[  24.088785]  PREFETCH window: d0000000-dfffffff
[  24.088794] PCI: Bus 3, cardbus bridge: 0000:02:04.0
[  24.088798]  IO window: 00002000-000020ff
[  24.088802]  IO window: 00002400-000024ff
[  24.088807]  PREFETCH window: 40000000-43ffffff
[  24.088812]  MEM window: 44000000-47ffffff
[  24.088816] PCI: Bridge: 0000:00:14.4
[  24.088819]  IO window: 2000-2fff
[  24.088824]  MEM window: c0200000-c02fffff
[  24.088828]  PREFETCH window: 40000000-43ffffff
[  24.089044] ACPI: PCI Interrupt Link [LNK0] enabled at IRQ 10
[  24.089048] PCI: setting IRQ 10 as level-triggered
[  24.089052] ACPI: PCI Interrupt 0000:02:04.0[A] -> Link [LNK0] -> GSI 10 (level, low) -> IRQ 10
[  24.089060] PCI: Setting latency timer of device 0000:02:04.0 to 64
[  24.089101] NET: Registered protocol family 2
[  24.118482] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[  24.118711] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[  24.121150] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[  24.122604] TCP: Hash tables configured (established 131072 bind 65536)
[  24.122611] TCP reno registered
[  24.134568] checking if image is initramfs... it is
[  24.880087] Freeing initrd memory: 6878k freed
[  24.880670] audit: initializing netlink socket (disabled)
[  24.880692] audit(1191714879.508:1): initialized
[  24.880875] VFS: Disk quotas dquot_6.5.1
[  24.880903] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[  24.880977] io scheduler noop registered
[  24.880982] io scheduler anticipatory registered
[  24.880985] io scheduler deadline registered
[  24.881001] io scheduler cfq registered (default)
[  24.881347] isapnp: Scanning for PnP cards...
[  25.234028] isapnp: No Plug & Play device found
[  25.291096] Real Time Clock Driver v1.12ac
[  25.291161] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[  25.292579] ACPI: PCI Interrupt Link [LNK1] enabled at IRQ 5
[  25.292585] PCI: setting IRQ 5 as level-triggered
[  25.292589] ACPI: PCI Interrupt 0000:00:14.6[B] -> Link [LNK1] -> GSI 5 (level, low) -> IRQ 5
[  25.292599] ACPI: PCI interrupt for device 0000:00:14.6 disabled
[  25.292703] mice: PS/2 mouse device common for all mice
[  25.293438] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[  25.293760] input: Macintosh mouse button emulation as /class/input/input0
[  25.293802] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[  25.293807] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[  25.294019] PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12
[  25.297464] i8042.c: Detected active multiplexing controller, rev 1.1.
[  25.298826] serio: i8042 KBD port at 0x60,0x64 irq 1
[  25.298833] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[  25.298836] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[  25.298839] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[  25.298842] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[  25.299034] EISA: Probing bus 0 at eisa.0
[  25.299046] Cannot allocate resource for EISA slot 1
[  25.299049] Cannot allocate resource for EISA slot 2
[  25.299065] Cannot allocate resource for EISA slot 8
[  25.299068] EISA: Detected 0 cards.
[  25.329166] TCP cubic registered
[  25.329182] NET: Registered protocol family 1
[  25.329262] Testing NMI watchdog ... OK.
[  25.368933] Using IPI No-Shortcut mode
[  25.368999] ACPI: (supports S0 S3 S4 S5)
[  25.369050]  Magic number: 11:805:958
[  25.369186]  hash matches device ptyzf
[  25.369261] Time: tsc clocksource has been installed.
[  25.369292]  hash matches device oldmem
[  25.369636] Freeing unused kernel memory: 328k freed
[  25.380282] input: AT Translated Set 2 keyboard as /class/input/input1
[  26.617864] Capability LSM initialized
[  26.665603] ACPI: CPU0 (power states: C1[C1] C2[C2])
[  26.665610] ACPI: Processor [CPU0] (supports 4 throttling states)
[  27.315937] b44.c:v1.01 (Jun 16, 2006)
[  27.316185] ACPI: PCI Interrupt Link [LNK2] enabled at IRQ 6
[  27.316189] PCI: setting IRQ 6 as level-triggered
[  27.316193] ACPI: PCI Interrupt 0000:02:05.0[A] -> Link [LNK2] -> GSI 6 (level, low) -> IRQ 6
[  27.319705] eth0: Broadcom 4400 10/100BaseT Ethernet 00:00:f0:74:24:e4
[  27.369030] usbcore: registered new interface driver usbfs
[  27.369062] usbcore: registered new interface driver hub
[  27.369098] usbcore: registered new device driver usb
[  27.370589] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
[  27.370868] ACPI: PCI Interrupt Link [LNK3] enabled at IRQ 11
[  27.370873] PCI: setting IRQ 11 as level-triggered
[  27.370876] ACPI: PCI Interrupt 0000:02:06.0[A] -> Link [LNK3] -> GSI 11 (level, low) -> IRQ 11
[  27.370894] ohci_hcd 0000:02:06.0: OHCI Host Controller
[  27.371117] ohci_hcd 0000:02:06.0: new USB bus registered, assigned bus number 1
[  27.371136] ohci_hcd 0000:02:06.0: irq 11, io mem 0xc0200000
[  27.487737] usb usb1: configuration #1 chosen from 1 choice
[  27.487773] hub 1-0:1.0: USB hub found
[  27.487784] hub 1-0:1.0: 3 ports detected
[    4.024000] Time: acpi_pm clocksource has been installed.
[    4.040000] ACPI: PCI Interrupt 0000:02:06.1[B] -> Link [LNK2] -> GSI 6 (level, low) -> IRQ 6
[    4.040000] ohci_hcd 0000:02:06.1: OHCI Host Controller
[    4.040000] ohci_hcd 0000:02:06.1: new USB bus registered, assigned bus number 2
[    4.040000] ohci_hcd 0000:02:06.1: irq 6, io mem 0xc0201000
[    4.124000] usb usb2: configuration #1 chosen from 1 choice
[    4.124000] hub 2-0:1.0: USB hub found
[    4.124000] hub 2-0:1.0: 2 ports detected
[    4.228000] ACPI: PCI Interrupt 0000:02:06.2[C] -> Link [LNK1] -> GSI 5 (level, low) -> IRQ 5
[    4.228000] ehci_hcd 0000:02:06.2: EHCI Host Controller
[    4.228000] ehci_hcd 0000:02:06.2: new USB bus registered, assigned bus number 3
[    4.228000] ATIIXP: IDE controller at PCI slot 0000:00:14.1
[    4.228000] ACPI: PCI Interrupt 0000:00:14.1[A] -> Link [LNK0] -> GSI 10 (level, low) -> IRQ 10
[    4.228000] ATIIXP: chipset revision 0
[    4.228000] ATIIXP: not 100% native mode: will probe irqs later
[    4.228000]    ide0: BM-DMA at 0x8070-0x8077, BIOS settings: hda:DMA, hdb:pio
[    4.228000]    ide1: BM-DMA at 0x8078-0x807f, BIOS settings: hdc:DMA, hdd:pio
[    4.228000] Probing IDE interface ide0...
[    4.252000] ehci_hcd 0000:02:06.2: irq 5, io mem 0xc0202000
[    4.252000] ehci_hcd 0000:02:06.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[    4.252000] usb usb3: configuration #1 chosen from 1 choice
[    4.252000] hub 3-0:1.0: USB hub found
[    4.252000] hub 3-0:1.0: 5 ports detected
[    4.516000] hda: SAMSUNG MP0402H, ATA DISK drive
[    5.188000] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[    5.220000] usb 1-1: new low speed USB device using ohci_hcd and address 3
[    5.424000] usb 1-1: configuration #1 chosen from 1 choice
[    5.608000] Probing IDE interface ide1...
[    5.732000] usb 2-2: new full speed USB device using ohci_hcd and address 2
[    5.948000] usb 2-2: configuration #1 chosen from 1 choice
[    5.952000] usbcore: registered new interface driver hiddev
[    5.964000] input: Logitech USB-PS/2 Optical Mouse as /class/input/input2
[    5.964000] input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:02:06.0-1
[    5.964000] usbcore: registered new interface driver usbhid
[    5.964000] drivers/usb/input/hid-core.c: v2.6:USB HID core driver
[    6.356000] hdc: TSSTcorpCDW/DVD TS-L462A, ATAPI CD/DVD-ROM drive
[    7.028000] ide1 at 0x170-0x177,0x376 on irq 15
[    7.044000] SCSI subsystem initialized
[    7.056000] libata version 2.20 loaded.
[    7.080000] hdc: ATAPI 6X DVD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33)
[    7.080000] Uniform CD-ROM driver Revision: 3.20
[    7.088000] hda: max request size: 512KiB
[    7.088000] hda: 78242976 sectors (40060 MB) w/8192KiB Cache, CHS=16383/255/63, UDMA(100)
[    7.088000] hda: cache flushes supported
[    7.088000]  hda: hda1 hda2 hda3 < hda5 >
[    7.464000] Attempting manual resume
[    7.464000] swsusp: Resume From Partition 3:5
[    7.464000] PM: Checking swsusp image.
[    7.464000] PM: Resume from disk failed.
[    7.512000] kjournald starting.  Commit interval 5 seconds
[    7.512000] EXT3-fs: mounted filesystem with ordered data mode.
[  21.492000] NET: Registered protocol family 10
[  21.492000] lo: Disabled Privacy Extensions
[  21.496000] ADDRCONF(NETDEV_UP): eth0: link is not ready
[  22.988000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[  23.016000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[  23.312000] Linux agpgart interface v0.102 (c) Dave Jones
[  23.596000] agpgart: Detected Ati IGP9100/M chipset
[  23.604000] agpgart: AGP aperture is 64M @ 0xc4000000
[  23.764000] piix4_smbus 0000:00:14.0: Found 0000:00:14.0 device
[  24.016000] Yenta: CardBus bridge found at 0000:02:04.0 [144d:b028]
[  24.096000] input: PC Speaker as /class/input/input3
[  24.144000] Yenta: ISA IRQ mask 0x0098, PCI irq 10
[  24.144000] Socket status: 30000820
[  24.144000] Yenta: Raising subordinate bus# of parent bus (#02) from #02 to #06
[  24.144000] pcmcia: parent PCI bridge I/O window: 0x2000 - 0x2fff
[  24.144000] cs: IO port probe 0x2000-0x2fff: clean.
[  24.144000] pcmcia: parent PCI bridge Memory window: 0xc0200000 - 0xc02fffff
[  24.144000] pcmcia: parent PCI bridge Memory window: 0x40000000 - 0x43ffffff
[  24.188000] b44: eth0: Link is up at 100 Mbps, full duplex.
[  24.188000] b44: eth0: Flow control is off for TX and off for RX.
[  24.188000] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[  24.252000] ACPI: PCI Interrupt 0000:00:14.5[B] -> Link [LNK1] -> GSI 5 (level, low) -> IRQ 5
[  24.676000] input: Wacom Intuos3 9x12 as /class/input/input4
[  24.684000] usbcore: registered new interface driver wacom
[  24.684000] drivers/usb/input/wacom_sys.c: v1.46:USB Wacom Graphire and Wacom Intuos tablet driver
[  24.776000] ACPI: PCI Interrupt 0000:00:14.6[B] -> Link [LNK1] -> GSI 5 (level, low) -> IRQ 5
[  24.780000] Synaptics Touchpad, model: 1, fw: 5.9, id: 0x254ab1, caps: 0x804713/0x0
[  24.820000] input: SynPS/2 Synaptics TouchPad as /class/input/input5
[  24.924000] pccard: CardBus card inserted into slot 0
[  24.980000] cs: IO port probe 0x100-0x3af: clean.
[  24.996000] cs: IO port probe 0x3e0-0x4ff: clean.
[  24.996000] cs: IO port probe 0x820-0x8ff: clean.
[  25.000000] cs: IO port probe 0xc00-0xcf7: excluding 0xc00-0xc07 0xc10-0xc17 0xc50-0xc57 0xc68-0xc6f 0xcd0-0xcd7
[  25.000000] cs: IO port probe 0xa00-0xaff: clean.
[  25.028000] ieee1394: Initialized config rom entry `ip1394'
[  25.060000] PCI: Enabling device 0000:03:00.0 (0080 -> 0083)
[  25.060000] ACPI: PCI Interrupt 0000:03:00.0[A] -> Link [LNK0] -> GSI 10 (level, low) -> IRQ 10
[  25.060000] PCI: Setting latency timer of device 0000:03:00.0 to 64
[  25.112000] ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[10]  MMIO=[44000000-440007ff]  Max Packet=[1024]  IR/IT contexts=[4/8]
[  25.280000] lp: driver loaded but no devices found
[  25.384000] fuse init (API version 7.8)
[  25.420000] Adding 538136k swap on /dev/disk/by-uuid/be10a4d5-a434-4559-b255-85e4acb3abdc.  Priority:-1 extents:1 across:538136k
[  25.536000] EXT3 FS on hda2, internal journal
[  25.624000] spurious 8259A interrupt: IRQ7.
[  25.628000] ieee1394: Node added: ID:BUS[0-00:1023]  GUID[000bc2030002b64a]
[  25.628000] ieee1394: Error parsing configrom for node 0-01:1023
[  25.628000] scsi0 : SBP-2 IEEE-1394
[  26.300000] ACPI: Video Device [ATIM] (multi-head: yes  rom: no  post: no)
[  26.468000] input: Power Button (FF) as /class/input/input6
[  26.476000] ACPI: Power Button (FF) [PWRF]
[  26.516000] input: Power Button (CM) as /class/input/input7
[  26.524000] ACPI: Power Button (CM) [PWRB]
[  26.564000] input: Sleep Button (CM) as /class/input/input8
[  26.572000] ACPI: Sleep Button (CM) [SLPB]
[  26.612000] input: Lid Switch as /class/input/input9
[  26.620000] ACPI: Lid Switch [LID0]
[  26.640000] ibm_acpi: ec object not found
[  26.724000] No dock devices found.
[  26.756000] ACPI: AC Adapter [ADP1] (on-line)
[  26.776000] ACPI: Battery Slot [BAT1] (battery present)
[  26.796000] Using specific hotkey driver
[  26.884000] pcc_acpi: loading...
[  33.080000] ppdev: user-space parallel port driver
[  34.192000] apm: BIOS version 1.2 Flags 0x0b (Driver version 1.16ac)
[  34.192000] apm: overridden by ACPI.
[  34.768000] Bluetooth: Core ver 2.11
[  34.768000] NET: Registered protocol family 31
[  34.768000] Bluetooth: HCI device and connection manager initialized
[  34.768000] Bluetooth: HCI socket layer initialized
[  34.816000] eth0: no IPv6 routers present
[  34.816000] Bluetooth: L2CAP ver 2.8
[  34.816000] Bluetooth: L2CAP socket layer initialized
[  34.840000] Bluetooth: RFCOMM socket layer initialized
[  34.840000] Bluetooth: RFCOMM TTY layer initialized
[  34.840000] Bluetooth: RFCOMM ver 1.8
[  46.632000] ieee1394: sbp2: Error logging into SBP-2 device - timed out
[  46.632000] sbp2: probe of 000bc2030002b64a-0 failed with error -16
[  46.632000] ieee1394: Failed to create unit 000bc2030002b64a-0
[  46.908000] ieee1394: Host added: ID:BUS[0-01:1023]  GUID[0011060000003ea6]
[  86.040000] cdrom: hdc: mrw address space DMA selected
[  87.052000] cdrom: hdc: mrw address space DMA selected
[  91.128000] ISO 9660 Extensions: Microsoft Joliet Level 3
[  91.480000] ISO 9660 Extensions: RRIP_1991A
fnhi@fnhi:~$

Editat de către smeagorl la 2007-10-07 00:22:23




Mesaj util ?   Da   0 puncte
#1131 by Serqiu (User) (0 mesaje) at 2007-10-07 07:02:26 (892 săptămâni în urmă) - [Link]Top
Кто-та знает, почему не могу ничего написать на разделе, в fstab написал это

/dev/hda5 /media/hdd ext3 rw,noauto,user,sync 0 1

Раздел автомотически боотится вопреки тому что вроде указал чтобы не боотился автомотически и не могу на нем ничего написать или перенести файлы, что я не так сделал?

Нашел ответ , sudo chown -R username:username /media/hdb1 помогло:)

Другой вопрос, теперь можно копировать файлы на разделе, а как сделать чтобы можно было создавать на нем папки и файлы , спасибо.


Mesaj util ?   Da   0 puncte
#1132 by Serqiu (User) (0 mesaje) at 2007-10-07 11:32:36 (892 săptămâni în urmă) - [Link]Top




 Посмотрите, возможно с этим что-та сделать? Не видны русские буквы


Mesaj util ?   Da   0 puncte
#1133 by jekader Donor (Besatzungsarmee) (0 mesaje) at 2007-10-07 12:30:28 (892 săptămâni în urmă) - [Link]Top
#1131 Serqiu, поставь в опциях user=<username>, group=<group> для пользователся, для которого должен быть доступ на запись.

#1132 Serqiu, нужно перегонять тэги в UTF8


Mesaj util ?   Da   0 puncte
#1134 by Gentoo (Power User) (0 mesaje) at 2007-10-07 14:02:01 (892 săptămâni în urmă) - [Link]Top
#1132 Serqiu, перегнать теги в utf8 или менять локаль на cp1251 или смени проигрыватель


Mesaj util ?   Da   0 puncte
#1135 by Serqiu (User) (0 mesaje) at 2007-10-08 21:37:40 (892 săptămâni în urmă) - [Link]Top
#1134 Gentoo, я добавил вот в /etc/fstab cp1251 (примерно default,username=user,cp1251) и после рестарта не мог загрузится в систему, ничего не мог делать с системой, gdm не запускался, на все выдавало this file is read-only , тоесть не мог ничего делать чтобы исправить что-та, потому-что даже с роотом не мог ничего делать с файлами из шелла...


Mesaj util ?   Da   0 puncte
#1136 by Gentoo (Power User) (0 mesaje) at 2007-10-08 22:04:15 (892 săptămâni în urmă) - [Link]Top
#1135 Serqiu, странные люди
вопервых корневой раздел да и вообще разделы UNIX систем так не монтируются, второе я говорил про локаль (locale), при изменении локали например на виндовую, параметры iocharset=cp1251,codepage=866 (не просто cp1251) указываются vfat разделам.

почему бы просто не использовать Audacious ?


Mesaj util ?   Da   0 puncte
#1137 by jekader Donor (Besatzungsarmee) (0 mesaje) at 2007-10-08 22:52:20 (892 săptămâni în urmă) - [Link]Top
кстати, это у одного меня уже вторую неделю не пашет зеркало на lug.md?


Mesaj util ?   Da   0 puncte
#1138 by Gentoo (Power User) (0 mesaje) at 2007-10-08 23:07:23 (892 săptămâni în urmă) - [Link]Top
#1137 jekader, не пахало теперь вроде пашет


Mesaj util ?   Da   0 puncte
#1139 by 916 (Power User) (0 mesaje) at 2007-10-08 23:15:52 (892 săptămâni în urmă) - [Link]Top
#1137 jekader, сбоев не было... много софта на неделе качал: никаких проблем... :unsure:


Mesaj util ?   Da   0 puncte
#1140 by jekader Donor (Besatzungsarmee) (0 mesaje) at 2007-10-08 23:44:36 (892 săptămâni în urmă) - [Link]Top
уже сейчас не воспроизведу ошибку - но возникает давненько :D какого-то пакета не хватает при aptitude update


Mesaj util ?   Da   0 puncte
#1141 by orlistul (Power User) (0 mesaje) at 2007-10-09 01:05:14 (892 săptămâni în urmă) - [Link]Top
am instalat ubuntu si am re-instalat pe el xfce .... mdaaa iata nici nu ma asteptam la o asa rapiditate... cam incomod un pic..dar in rest doar satisfactie :D


Mesaj util ?   Da   0 puncte
#1142 by grey (Serial Thrilla) (0 mesaje) at 2007-10-09 10:39:18 (892 săptămâni în urmă) - [Link]Top
#1141 orlistul, "... cam incomod un pic ..." - de la inceput poate, insa mai apoi - rupe. tre sa gasesti aplicatiile potrivite si foc la ghete :wink:


Mesaj util ?   Da   0 puncte
#1143 by Poker Donor (ydirtgouisdhgvj) (1 mesaje) at 2007-10-09 13:05:22 (892 săptămâni în urmă) - [Link]Top
oue! ghibon iz kaming))


Mesaj util ?   Da   0 puncte
#1144 by orlistul (Power User) (0 mesaje) at 2007-10-09 19:02:30 (892 săptămâni în urmă) - [Link]Top
#1142 grey, XFce rupe tot, intr-adevar, si in genere apt-get sub consola e ceva ce nu se compara cu nimic :D asa rapid si update si instalare...


Mesaj util ?   Da   0 puncte
#1145 by orlistul (Power User) (0 mesaje) at 2007-10-10 22:54:34 (892 săptămâni în urmă) - [Link]Top
Making all in po
make[2]: Entering directory `/tmp/selfgz13283/xfce-mcs-manager/po'
file=`echo ar | sed 's,.*/,,'`.gmo \
  && rm -f $file &&  -o $file ar.po
/bin/sh: -o: not found
make[2]: *** [ar.gmo] Error 127
make[2]: Leaving directory `/tmp/selfgz13283/xfce-mcs-manager/po'
make[1]: *** [all-recursive] Error 1
make[1]: Leaving directory `/tmp/selfgz13283/xfce-mcs-manager'
make: *** [all] Error 2
!! Failed to build xfce-mcs-manager, see the errors above
!! for details on the problem.

problema apare la instalarea XFce4.4.1

cu toate ca toate dependetele sunt satisfacute pre-install
Checking for usable C compiler... gcc
Checking for usable C++ compiler... g++
Checking for GNU make... make
Checking for package config tool... pkg-config
Checking for GLib (GModule) >= 2.6.0... detected 2.12.11 in /usr
Checking for Gtk+ >= 2.6.0... detected 2.10.11 in /usr
Compiling installer-gui... OK (ignored warnings)
Running installer-gui...

deci, nu reusesc sa instalez pina la capat interfata nou-nouta de pe site-ul oficial,... poate ca problema e anume in faptul ca e cam "cruda".. nu stiu... idei?

Editat de către orlistul la 2007-10-10 23:24:53




Mesaj util ?   Da   0 puncte
#1146 by vsx Donor (The Infernal Brothers) (0 mesaje) at 2007-10-10 23:25:22 (892 săptămâni în urmă) - [Link]Top
#1145 orlistul, instaleaza pachete gettext-devel (sau cu nume asemanator)


Mesaj util ?   Da   0 puncte
#1147 by orlistul (Power User) (0 mesaje) at 2007-10-10 23:52:23 (892 săptămâni în urmă) - [Link]Top
#1146 vsx, am observat si eu chestia cu po... acus vedem ce schimba :)


Mesaj util ?   Da   0 puncte
#1148 by orlistul (Power User) (0 mesaje) at 2007-10-11 01:56:18 (892 săptămâni în urmă) - [Link]Top
mersi vsx, a functionat, dar iata alta problema :(

## Configuring xfce4-appfinder
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for gawk... no
checking for mawk... mawk
checking whether make sets $(MAKE)... yes
checking whether to enable maintainer-specific portions of Makefiles... no
checking for style of include used by make... GNU
checking for gcc... gcc
checking for C compiler default output file name... a.out
checking whether the C compiler works... yes
checking whether we are cross compiling... no
checking for suffix of executables...
checking for suffix of object files... o
checking whether we are using the GNU C compiler... yes
checking whether gcc accepts -g... yes
checking for gcc option to accept ANSI C... none needed
checking dependency style of gcc... gcc3
checking how to run the C preprocessor... gcc -E
checking for egrep... grep -E
checking for AIX... no
checking for strerror in -lcposix... no
checking for ANSI C header files... yes
checking for sys/types.h... yes
checking for sys/stat.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for memory.h... yes
checking for strings.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for unistd.h... yes
checking minix/config.h usability... no
checking minix/config.h presence... no
checking for minix/config.h... no
checking for gcc... (cached) gcc
checking whether we are using the GNU C compiler... (cached) yes
checking whether gcc accepts -g... (cached) yes
checking for gcc option to accept ANSI C... (cached) none needed
checking dependency style of gcc... (cached) gcc3
----.....etc......----
checking if g++ supports -c -o file.o... yes
checking whether the g++ linker (/usr/bin/ld) supports shared libraries... yes
checking dynamic linker characteristics... GNU/Linux ld.so
checking how to hardcode library paths into programs... immediate
appending configuration tag "F77" to libtool
checking for perl... /usr/bin/perl
checking for XML::Parser... ok
checking for iconv... /usr/bin/iconv
checking for msgfmt... /usr/bin/msgfmt
checking for msgmerge... /usr/bin/msgmerge
checking for xgettext... /usr/bin/xgettext
checking what sound system to use... alsa
checking for pkg-config... /usr/bin/pkg-config
checking for pkg-config >= 0.9.0... 0.21
checking for alsa >= 0.9.0... not found
*** The required package alsa was not found on your system.
*** Please install alsa (atleast version 0.9.0) or adjust
*** the PKG_CONFIG_PATH environment variable if you
*** installed the package in a nonstandard prefix so that
*** pkg-config is able to find it.
!! Failed to configure xfce4-mixer, see the errors above
!! for details on the problem.


eu am instalat ALSA... straniu


Mesaj util ?   Da   0 puncte
#1149 by orlistul (Power User) (0 mesaje) at 2007-10-11 03:40:47 (892 săptămâni în urmă) - [Link]Top
gata am rezolvat.... am avut impresia ca instalarea prin gnome a Xfce4.4.1 aduce a gentoo :lol: ochii rosii si nedormiti


Mesaj util ?   Da   0 puncte
#1150 by RuCa (Power User) (0 mesaje) at 2007-10-11 07:18:40 (892 săptămâni în urmă) - [Link]Top
#1149 orlistul, Dar ce ... xfce nu-i in repozitoriu ?
la ce-ti trebuie sa-l compilezi ? :-)


Mesaj util ?   Da   0 puncte

1 2 3 4 5 6 7 8 9 10 ... 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 ... 547 548 549 550 551 552 553 554 555 556
<< Precedenta      Următoarea >>

Forum Index > Open Source > Sisteme de operare > (K,X)Ubuntu - Support Line


Navigare rapidă:


Comunitatea digitală din Moldova. Să adunăm și să organizăm conținutul autohton de pe întreg internet pe un singur site web.