1. Сумма, которую готовы потратить.

2. Где собираетесь приобрести, откуда будете заказывать, желательно дать ссылку на сайт продавца, если речь идет о загранице.

3. Цель приобретения, для каких нужд и задач.

4. Диагональ экрана.

...так же можете дать ссылку на интересующую модель, если нужен совет, или комментарий по данной модели и ее цене.

1. Suma de care dispuneți.

2. De unde va fi procurat, sau comandat, este de dorit să oferiți link la site-ul vânzătorului, atunci când este vorba de străinătate.

3. Cu ce scop si pentru care necesitați.

4. Diagonala ecranului.

...de asemenea puteți oferi link la modelul interesat, dacă aveți nevoie de un sfat, sau comentariu la modelul dat și la prețul lui.

Цена-Качество-Производительность/Preț-Calitate-Productivitate:

Asus/Apple/Dell

Lenovo/Clevo/MSI

Fujitsu/Sony/Toshiba

Acer/HP/Samsung

...многое еще зависит от ценовой категории
...mult depinde și de categoria de preț

http://nanoteh.md/

http://www.zap.md/

http://shopit.md/

http://itunexx.md/

http://dron.md/ (+service)

The temperatures only partly convinced us. When the laptop was idle, (hardly or not at all loaded), the casing's surface temperature settled to an acceptable 31 °C (87.8 °F).

In return, the chassis heated up quite strongly during full load. Our thermometer recorded an average of 43 °C (109.4 °F) on the top and 41 °C (105.8 °F) on the bottom after one hour of stress testing via the tools FurMark and Prime95. At times we even measured 50 °C (122 °F). The IdeaPad Y500 did not heat up quite as badly in "normal" 3D programs. Games can thus be enjoyed without major restrictions.

The components also get fairly warm in extreme conditions. The CPU clock dropped to a still viable 2.4 GHz while climbing up to 90 °C (194 °F). The graphics cards exhibited a completely different behavior in the stress test. While the one GT 650M ran with the usual 790/1000 MHz (maximum 84 °C/183.2 °F), the second GT 650M throttled to low 135/203 MHz very soon. However, we are not sure whether FurMark ran properly on the second accelerator since the load tended to 0 in GPU-Z.